What Goes Down, Must Go Up
I previously mentioned that I am working on several personal photo projects. One of those has reached its conclusion. As a member of the Mountaineers, I decided to document the “remodel” of the Tacoma branch’s clubhouse. The remodel involved tearing down the old building, except for a portion of one wall, and then building a whole new structure. Approximately weekly from January through August, I took shots of the clubhouse as it went down and back up again. I’ve made a couple of videos with those shots. The club will be showing them at the Grand Opening of the new facility this coming Thursday. However, I’ve posted them on Vimeo with links here.
Obviously to do a series of shots like this, you want to shoot from exactly the same spot with exactly the same setting every time. I found this is easier said than done. When I shot the images, I took two sets of shots from each vantage point. Using my 24-70mm lens, I shot one set at 24 mm and another set at 28 mm. Additionally, I always used aperture-priority mode with the f-stop at f/11 and ISO at 100. I had the camera on my tripod, and I always set the tripod feet in the same spots.
After taking shots for several weeks, I found I was more successful with the zoom set at 24 mm instead of 28 mm. I found that when I set it at 28 mm, it was difficult to set the lens consistently at 28 mm – sometimes it would up being at 27 mm, sometimes at 29 mm. I suggest if you try the same thing, and use a zoom lens, always set the lens at one end or the other of its zoom range for more consistent results.
Another difficulty resulted from my tripod, which has a ball head. With this tripod head, it was difficult to always get the camera pointed exactly the same direction and angle. I used a bubble level on the hot shoe to help and tried to line the edges of the frame at a consistent spot on the neighboring building. Even so, I found considerable variation between shots taken in different weeks. Consequently, I rotated and cropped each image in Lightroom, attempting to get the orientation exactly the same for each image. I was somewhat successful, the building does “wander” a bit back and forth between images, but it isn’t too objectionable in my opinion. Overall I’m happy with the result.