Winter just seems never to end. We’ve had nothing but a cold, rainy March so far. So what should you do when bored and stuck inside on a rainy winter day? Try your hand at scanography – photography using a flat-bed scanner. If you don’t already own such a scanner, you can often find them cheap at a second-hand store. The images shown here were taken with my Epson Perfection 2450 Photo scanner that I purchased several years ago at Goodwill for $5. The trick is getting such a scanner to run on your computer – often drivers are not available for newer versions of Windows. For example, Epson offer a driver for my scanner for Windows version after XP.
I’m running Windows 7. When I first got the scanner several years back, Windows 7 was still fairly new. To get the scanner to work, I did a Google search on Windows 7 drivers for my scanner model. I discovered that a different Epson model had a driver that worked, so I downloaded that and sure enough, it worked.
Now skip ahead a few years. I tried Widows 10 and decided to go back to Window 7, but when I did so, I lost the driver for the scanner. Well actually, I still had the driver, but Windows would not allow me to install it because it was “unsigned.” This is a case of the software trying to protect your computer from malignant software. I get it, but I really did want to use the scanner again. Finally, after several long Google searches, I discovered there is a way to get Windows to install unsigned drivers. You must first disable the driver signature enforcement, then install the driver. It wasn’t that hard to do, and sure enough, I was back in business.
Since if you pick up a cheap, used scanner, it probably won’t be the same model as mine, I suggest the following. First, go the the manufacturer’s support site and see if there is a driver available. If so, your golden. If not, search Google for an alternate driver. For example, in my case, the Google search might be: “windows 7 driver for epson 2450 scanner”. There is a good chance this will give you a driver that will work. However, if it is unsigned, you still will need some help installing it. So try this Google search: “installing unsigned drivers windows 10”. You will get a number of results that explain how to install unsigned drivers. Good luck!
Once you do get your scanner installed, it’s time to have fun. All of the images here were taken using the scanner. The fun thing about using a scanner for photography, of scanography as it is called, is that you can create interesting effects because the scanner captures an image a line at a time. This means that as the scanner light and sensor moves, you can move your subject either blurring it or making it appear more than once in the frame. I found this is particularly fun for self portraits (just watch out for fogging the glass with your breath).
I found that scanning to TIFF files worked better than to JPGs, but your experience may be different. Once the files are created, I imported them into Lightroom and treated them just like any other file, optimizing them as I saw fit. I found the biggest problem is dust. I’m use to a few dust spots from my camera sensor. With the scanner, you can get hundreds of dust spots, all perfectly in focus. So be sure the clean the glass well when doing your scanography.
Wondering what kind of images you can make with a scanner? My samples here will give you a few ideas. If you want more, just do a Flickr or Google image search for scanography. There is some very creative work out there.
If you are like me, it is often difficult to do serious photography when traveling with your family. I wish I had a simple method to address this problem, but I don’t. If you do, please let me know! Or perhaps you don’t think this is a problem. If that is that case, please tell me why.
When traveling with Tanya, she usually requires me classify the trip as a “photograph trip” or a “non-photography trip.” On non-photography trips, I can still take my equipment, but I am expected not to disrupt any trip plans with photography. On photography trips, the world’s my oyster and I dictate when and where.
When we take a big trip, like our trip to Europe last month, they are by default non-photography trips. This is especially true when we travel with others; in this particular case, traveling with my mother-in-law and my son. One word of advice – if you want to get a lot of photography in while traveling, don’t travel with your mother-in-law.
On a photography trip, I tend to take the whole bag. But for non-photography trips, I go more minimal. I usually take my camera backpack as a carry-on in the plane, but I don’t typically carry it around when out shooting except when I’m going out by myself (see below). Even then, I take some of the gear out instead of my normal kit. I typically take my Canon 6D body with battery grip, a 28-300 mm lens, a 17-40 mm lens, about 5 or 6 memory cards, a polarizing filter, a split-neutral density filter, a Canon speedlight flash, four batteries, a battery charger, a tripod, my laptop, a card reader, and a few various accessories (lens cloth, etc.). In addition to the backpack, I also bring a Think Tank Pro digital holster as a smaller bag.
So when on a non-photography trips and heading out with the family, I go with a minimal set of equipment. I will put the 28-300mm lens on the camera, take the battery grip off, and put the camera in the holster (the camera will not fit in the holster with the battery grip on). In the pockets of the holster, which are rather small, I’ll carry a spare battery, a spare memory card, a cleaning cloth, and the polarizing filter. Sometimes, if I know I will want it, I’ll carry the 17-40mm lens in my coat pocket (no room in the camera holster). Rarely I’ll carry the tripod as well with this minimal setup. This minimal set of equipment allows me to get quality photographs without impacting the family, though I will often have to shoot at a higher ISO than I’d like due to not having the tripod (see my last post).
But my main strategy to get quality photography time is to go out without the family. This usually means going out at night after the family has retired to our lodgings for the evening or getting up extra early and going out prior to everyone else being ready for the day. This is one reason I like to stay near major attractions that might look good at night. On your recent trip, we stayed within easy walking distance of the Louvre when in Paris and near the Block of Discord in Barcelona. When going out on my own, I carry my full kit in the photo backpack and always take the tripod (even with high ISOs, it is hard to shoot at night without a tripod). The added advantage is that often there are not very many people around wandering into my frame when shooting, and even if they do, the exposures are long enough that they typically don’t show up if they keep moving.
Shooting at night also has the added advantage of making the sky easier to deal with. When doing travel photography, you typically don’t have a lot of time at any one destination. So you can’t necessarily wait for those “good” sky days. Often the sky is a mass of clouds without any redeeming detail, and if you place it in your composition, it sits there like a huge blown-out white blob. Not to mention the contrast problem it creates with the foreground and your image’s subject. Not a problem at night. At worst, clouds pick up scattered lights from the city and take on an orange glow, which is easy to fix in processing.
The images accompanying this post are from two nights I went out by myself, once in Paris and the second in Barcelona. Unlike my previous post, these images were all taken with an ISO of 100 or 200 while using a tripod. The featured image at the top of the post is of the courtyard of the Louvre.
Last Friday, I took the day off from the day job to do some photography. It was a day Carson would have loved, rainy and cold. With Carson gone, Tanya and I decided to take our cat, Patch, along instead. He wasn’t so sure about the whole thing, and stayed in the car until our last stop (Rainbow Falls State Park), where he did explore a bit.
But this post isn’t about Patch, it’s about photographing in the rain. If you live on the wet side of the mountains in the Pacific Northwest, you best get use to photographing in the rain if you want to shoot in fall and winter. That said, I try to avoid it as much as I can. Last Friday, I was not excited about going out. The weather forecast called for 100% chance of rain, and it was not wrong. Shooting in adverse weather can have its benefits, but often it is just miserable. However, Tanya convinced me that we should go (easy for her to say, I was the one to be out in the rain; she took papers to grade).
As it turned out, I was happy we went. As you can see by the attached photos, I think I came away with some good shots. Here’s a few hints for photographing in the rain (not listed in any particular order).
1. Take good rain gear for your camera – unless you have a waterproof camera, you’ll want some sort of protection to keep your camera dry. Currently, I use a Rainsleeve by Op/Tech. These are inexpensive plastic sleeves with openings on both ends. One has a drawstring to tighten around the camera lens hood. The other end allows you to hand hold the camera or attach it to a tripod. A small hole is also provided for the viewfinder. I find these sleeves work well when on a tripod, and allow you to control most the camera functions through the plastic. I like them less for hand holding the camera because sticking your wet hand up into the sleeve defeats the purpose, plus it is a bit tight. There are many other options also available.
You might also consider making an umbrella holder for you tripod. I have a friend who has a similar setup and really likes it. I, personally, have not tried something like this out yet, but as long as it is not windy, an umbrella seems like it should work well.
2. Take good rain gear for yourself – be sure to keep yourself dry as well. I like to take rain pants as well as a raincoat. When photographing, I often kneel on one knee (all my jeans wear out on the left knee knew sooner than the right). With rain pants, there is no worry about kneeling in water and mud.
3. Use a tripod – while using a tripod is always a good practice, in the rain it is especially needed. The skies are much darker than on typical non-rainy days, leading to longer exposure times. Also, it is easier to keep the camera dry if it is on a tripod.
4. Use a lens with a long lens hood – when using the Rainsleeve, the lens hood is outside the plastic. It is the hood that protects the lens from falling rain drops. This works best if the lens hood is long and the glass sits back inside it. This is why I tend to avoid using a wide-angle lens in the rain if at all possible. Lens hoods for wide-angle lenses provide almost no protection from rain. All the shots shown here were taken with a 24-70mm lens. When extended to the 24mm setting, the lens is close to the open end of the lens hood, so I had to take more care when using that setting.
5. When not shooting, keep your lens pointed down – don’t invite rain onto your lens, try to keep the camera pointed downward.
6. Use a cable release – anything you can do to keep a wet hand from touching the camera will help keep it dry. I use a cable release which hangs down out of the Rainsleeve. Alternatively, I could trip the shutter button through the Rainsleeve, but with long exposures, it is good practice to use a cable release anyway.
7. Have a lintless cloth handy – just in case you need to wipe stray water off your lens. Take a look at the lens occasionally to look for water drops (which are sometimes hard to see through the viewfinder).
8. Avoid the sky in your compositions – at least if the sky is uniformly gray (as it is often is around here when it rains). For most of the subjects I photograph, the sky (even if not uniformly gray) is very much lighter than the subject, creating huge contrast problems. Expose correctly for your subject, and the sky becomes a overexposed white blanket. Expose for the sky, the subject is a dark mess. HDR is a possible solution, but if there is no contrast within the sky itself, that doesn’t help much. It’s best to just keep the amount of sky in the frame minimized.
9. Pick subjects that can be photographed without much sky – it is easier to keep the sky out of your compositions if the subject can be photographed without the sky being prominent. If you’ve never been to where you are going, and don’t have an idea whether the sky will be prominent or not, many subjects can be researched on Flickr to give you an idea. (For example, look at this Flickr search for the Cedar Creek Grist Mill, my main destination last Friday.)
10. Use a polarizer – using a polarizer can make a big difference in your images. When everything is wet, everything has reflections. With that big gray sky above, there are a lot of annoying reflections in any composition. Of course, using a polarizer cuts down on the light entering the camera, making the use of tripod (#3 above) even more important.
11. Watch out for wind – wind complicates matters considerably. With a stiff wind, rain no longer fall vertically. Wind demands even more care to keep things dry.
12. Use a memory card with enough storage – start your photo shoot with a fresh memory card and one with enough storage for the entire shoot. You don’t want to open up the camera to change cards and get water inside.
13. Consider your lens choice carefully and change lenses out of the weather – you don’t want to change lenses in the rain; there is too much chance of getting water inside the camera. Before you leave you car, put on the lens that will give the most shots. Consider using an all-purpose, travel zoom, like an 18-200 mm or similar (of course, such lenses typically have less light gathering power than other lens with less zoom range, making tripod use even more important). If you do have to change lenses, do so in shelter or with much care if still outside. (BTW, I do not own travel zoom. I try to restrict my compositions to those requiring a single lens. In last Friday’s case, I only used my 24-70 mm lens).
That’s it for now. Do have any other hints for photographing in the rain?
“What’s in your wallet?” So goes the tagline from a Capital One credit card commercial that most of you (at least in the United States) probably know well. With that tagline, Capital One would have you believe that their credit card is better than others and should be the one in you wallet.
For photographers, the comparable question is “what type of camera do you use?” or “what gear do you carry in you camera bag?” If I had a dollar for every time I’ve been asked these questions, I could buy a new camera.
I believe good photography has more to do with the gray matter between your ears than your camera equipment. However, that said, it is true you cannot do photography without equipment. When two photographers meet for the first time, the inevitable question always arises: “What camera do you shoot with?” My question to you is, does it really matter?
I think one reason this question gets asked is that the two photographers in question are trying to find common ground as they create a social relationship. Personally, I don’t take any comment seriously that claims one camera is better than any other, it is just that some cameras are better at creating certain types of images than other cameras. For example, my DSLR beats my Android phone without question at shooting landscapes, but the phone does a better job at spontaneous photos among friends (not that the DSLR wouldn’t do a fine job in that instance, but by the time I dig it out of the bag, put on the correct lens, and get the exposure set correctly, the moment of spontaneity will be gone).
There seems to be a particularly big “conversation” about Nikon vs Canon among many photographers. There are loyalists on both sides, and while often good-natured, sometime the conversations seem more like battles. Personally I shoot with Canon equipment, but this is not because I think Canon equipment is better. The only reason I shoot with Canon equipment is that when I switched from film to digital, Canon had a newer camera model than Nikon. If I made the switch a few months later, I could well be shooting with Nikon equipment today. (My film camera is an Olympus OM4T. So, if at the time of my switching to digital, Olympus had made a digital camera with a full-frame or APS sensor instead of a 4/3s sensor, which uses a different lens mount so with their camera I couldn’t use my existing film lenses, I’d be shooting with Olympus equipment.)
So, even with my mini-rant above about such questions, inquiring minds want to know what’s in my camera bag. Therefore, I present what is in my camera bag (or should I say bags, as I have more than one and carry different items based on the type of outing).
Standard (or default) equipment:
- Canon 6D camera with Canon battery grip and Acratech quick release plate
- Canon EF 17-40mm 1:4 L USM zoom lens
- Canon EF 24-70mm 1:2.8 L zoom lens
- Canon EF 70-200mm 1:2.8 L IS USM zoom lens with Acratech quick release plate
- Canon EF 100mm 1:2.8 USM macro lens
- Canon EF 1.4x II extender
- Lowepro Vertex 100AW camera bag
- set of three Kenko extension tubes
- Vello wireless Shutterboss
- Canon RS-80N3 remote switch
- Canon 550EX Speedlight with Yongnuo compact battery pack SF-18
- Yongnuo off-camera shoe cord OC-E3
- ThinkTank Photo Pixel Pocket Rocket (digital card holder) with 4 to 6 SDHC cards (8, 16, or 32 mb, various brands)
- 2 spare Canon batteries
- lint-free cleaning cloth
- Lenspen lens cleaning pen
- allen wrench (for removing quick release plates)
- hot-shoe double bubble level
- set of 15 colored filters for use on the flash
- 2 B+W 77mm circular polarizing filters (one is dented and very hard to rotate)
- B+W 77mm 110 ND 3.0-10BL 1000x filter (10 stop neutral-density filter)
- B+W 77mm 092 IR 20-40x (infrared filter)
- Tiffen(?) 2-stop, soft-gradient, split neutral-density filter
- six AAA batteries
- Op/Tech Rainsleeve
- user manuals for the 6D, the 550EX and the Shutterboss
- spare contact lens case
- business cards
- Manfrotto 190 carbon fiber 4-section tripod with an Acratech Ultimate Ballhead (I often carry the tripod along, but not always)
Extra equipment (in addition to the standard) for event-shooting
- Canon 50D with Canon battery grip
- a second Canon 550EX speedlight with battery pack
- Demb Flip-it (variable angle flash reflector)
- Demb flash bracket
- Demn flash diffuser
- Lowepro Nova 180AW camera bag
Minimal kit (when I don’t want to carry a lot of stuff)
- Canon 6D camera with (optional) Canon battery grip
- Canon EF 24-70mm 1:2.8 L zoom lens
- (optional) Canon EF 70-200mm 1:2.8 L IS USM zoom lens
- a small Lowepro bag (either the Nova 180 or a yet smaller one that I’m not sure of the model number)
- lint-free cleaning cloth
- Lenspen lens cleaning pen
- a couple spare SDHC cards
Optional equipment that I sometime carry
- Photoflex MultiDisc 5 in 1 42-inch reflector
- Photoflex MultiDisc 5 in 1 22-inch reflector
- Wimberley plamp
- Visual Echos Flash X-tender
- Thinktank Photo belt, harness and modular bag system
- Bogen 3021 tripod with Bogen ballhead
So, what is in your camera bag?